Hey guys! I’m from the Seattle area, Sultan to be specific. Just got an Otter X16 over the weekend and assembled it myself. Working like a champ. Been wanting one of these since the day the 8 bit guy announced his dream.
I have my board in a standard MicroATX case for the time being, which just dwarfs the tiny Otter board. But the case I plan to put it into doesn’t arrive from the Kickstarter I bought it from for another two or three months. So at least this case will keep it safe in the meantime.
Otter variant owner from Sultan, WA
-
UnaClocker
- Posts: 2
- Joined: Mon Jan 22, 2024 5:35 pm
Otter variant owner from Sultan, WA
- Attachments
-
- IMG_6813.jpeg (3.57 MiB) Viewed 1718 times
Re: Otter variant owner from Sultan, WA
If you're looking for a reasonably priced case in short order, I can recommend m00dawg's laser cut OtterX case. He has them on his storefront here: https://www.bitbybitsynths.com/shop/ott ... -cut-case/
This is one I had cut on special acrylic with a metallized foil on it. I have no idea where to get this stuff, and getting the foil removed took me two hours but the results are absolutely stunning.
This is one I had cut on special acrylic with a metallized foil on it. I have no idea where to get this stuff, and getting the foil removed took me two hours but the results are absolutely stunning.
- IMG_20240118_202556134.jpg (2.2 MiB) Viewed 1684 times