Commander X16

Here, I demonstrate a couple of DOS commands:

• 1. DOS"$" - Directory
  2. DOS"$=P" - Partition List
  3. DOS"CPn" - Change Partition - n is partition number, ex. 1
  4. DOS"CD:directory" - Change Directory - directory is name of directory

• 1. DOS"$" - List directory on partition 1
  2. DOS"$=P" - Lists partitions on multi-partition disk or sdcard
  3. DOS"CP2" - Change to partition 2
  4. DOS"$" - Lists directory of partition 2
  5. DOS"CD:Z*" - Change to the ZIGGURAT directory on partition 2
  6. DOS"$" - Lists directory of ZIGGURAT on partition 2
  7. DOS"CP1" - Change to partition 1
  8. DOS"$" - Lists directory of partition 1

As for the multi partition sdcard, in short, I used dd to create a sdcard image and used fdisk to create 2 primary partitions in Linux.