My laser cut X16 Dev case is now available!

[m00dawg]

Not particularly. If/when I do it, I was going to either just record the build just at a 45/45 angle or do a front direct snapshots. This is what I did for my Eurorack cases (also finger joint boxes):

https://www.bitbybitsynths.com/instruct ... he-skiffy/

[mortarm]

So your not looking for something to include with the kit, but instead an online guide.

BTW, you might want to take down that vaca notice on your home page.

[m00dawg]

Yep correct. Ah oh, vacation was taken down days ago though or should have. Can you let me know where you are seeing that?

[mortarm]

https://www.bitbybitsynths.com/

[voidstar]

Here are my notes on putting one of these laser-cut cases together. Have it all together, looks great.

https://voidstar.blog/commander-x16-ass ... -cut-case/

Will finish up more of the notes in the coming days, but the photos mostly tell the story.

[m00dawg]

https://www.bitbybitsynths.com/

Mobile or desktop?

EDIT: NM looks like it's mobile. Not sure why that's even there as I removed it from the layout. Thanks for the heads up on that. I'm able to reproduce the issue on my end it looks like. Turns out it was the page cache not getting cleared after updating the header tagline. Thanks for the poke!

[m00dawg]

Here are my notes on putting one of these laser-cut cases together. Have it all together, looks great.

https://voidstar.blog/commander-x16-ass ... -cut-case/

Will finish up more of the notes in the coming days, but the photos mostly tell the story.

That's a great write-up, thanks for doing that and the feedback! I noted the concern about needing to open the case more easily and I might look at adding a rear tab along the back or some such to make that easier.

[mortarm]

Thanks for the poke!

Glad you took a PEEK.

[m00dawg]